Air Techniques A/T 2000 XR Dental X-ray Film Processor Developer P/N: 45200 - $1,300 - (Sandpoint, ID)

This processor works great, never had any problems with it. Has some yellowing on top. The A/T 2000 XR processes all intraoral, occlusal, TMJ, panoramic, cephalometric, and duplicating film sizes. The operator can choose between a “quick-look” 2½ minute ENDO SPEED cycle or a full 5½ minutes NORMAL SPEED cycle. The active mode is clearly indicated with an illuminated arrow. Simply select the speed and insert a film into the film inlet and the processing cycle automatically starts. When processing is complete, the film exits into the film receptacle tray, and the A/T 2000 XR automatically returns to stand-by. A/T 2000 XR takes the guesswork out of chemistry replenishment - a micro-computer counts film and automatically replenishes chemistry proportional to film load for the best processing results. Your new A/T 2000 XR is also designed with the environment in mind - used chemistry is easily captured for disposal in accordance with local codes. Specifications: Water Flow: ½ gallon per minute water flow (while processing film)Water Pressure: 80 PSI maximum / 30 PSI minimum. Water source must have a manual shut-off near processor.Water Connection: Valved ¾” male garden hose fitting near rear of processor. 6’ foot hose with standard female garden hose fittings not provided.Water Backflow Prevention: A vacuum breaker is not normally required because the processor has a 1” air gap between water supply inlet and the maximum possible water level height.Water Temperature: 55°Fahrenheit to 80°Fahrenheit (13°Celsius to 27°Celsius)Drain: 1 ½” vertical PVC standpipe, open at top. DO NOT DRAIN INTO COPPER OR BRASS. The top of the standpipe must be 6” below the bottom of the counter top.

Posted in Sandpoint, ID, Business for Sale
From ebay.com - 1 month ago