Crest Pro-LITE 7.5 DSP 2-Channel 1425 Watt at 8 Ohms Power Amplifier with DSP - $499 - (Keyser, WV)

Crest Audio Pro-LITE 7.5 DSP Specifications:Rated Watts 2ch x 2 ohms: 4800 watts 20ms repetitive burst / 3790 watts 1% THD both channels driven @ 1 kHz.Rated Watts 2ch x 4 Ohms: 2810 watts 20ms repetitive burst / 2450 watts 1% THD / 2030 watts 0.15% THD, both channels driven @ 1 kHz.Rated Watts 2ch x 8 Ohms: 1550 watts 20ms repetitive burst / 1425 watts 1% THD / 1200 watts 0.15% THD, both channels driven @ 1 kHz.Minimum Load Impedance: 2 OhmsMaximum RMS Voltage Swing: 124 voltsFrequency Response: 20 Hz - 25 kHz; +0dB, -3dB20 Hz - 20 kHz 2ch x 2 ohms: - 75dB @ 1 kHzVoltage Gain: x 40 (+32dB)Crossover: 100Hz switchable 2nd order high pass and 3rd low pass per channel.Crosstalk: > -60dB @ 1 kHz @ 1000 watts power @ 8 Ohms.Hum and Noise: > -100dB, "A" weighted referenced to rated power @ 4 Ohms.Slew Rate: > 12V/µsDamping Factor (8 Ohms): > 200:1 @ 20 Hz - 1 kHz @ 8 OhmsPhase Response: +15 to -85 degrees from 20 Hz to 20 kHzInput Sensitivity: 2.25 volts +/- 3% for 1 kHz 4 Ohm rated power, 2.2 volts +/- 3% for 1 kHz 2 Ohm rated powerInput Impedance: 20 kOhms, balanced and 10 kOhms unbalanced.Current Draw @ 1/8 in VA (watts): 2210 (1440) @ 2 Ohms, 1550 (950) @ 4 Ohms, 985 (560) @ 8 OhmsCurrent Draw @ 1/3 in VA (watts): 4260 (3150) @ 2 Ohms, 3120 (2160) @ 4 Ohms, 1890 (1200) @ 8 OhmsIdle Consumption: 250VA, 120 watts.Cooling: 3 temperature dependent variable speed fans.Controls: 2 front panel attenuators, crossover select switch for HPF, Normal and LPFIndicator LEDs: Five LED indicators per channel: Active, Signal, DDT, Temperature and DCProtection: Thermal, DC, subsonic, incorrect loads, under and over voltageConnectors:Inputs: Dual combination 1/4”/XLROutputs: Dual 1/4” thru, one 2-pin & one 4 pin twist-lock connectorConstruction: 0.062” thick aluminumDimensions: 3.5” x 19” x 17” behind front panel + 0.6” for handleNet Weight: 14.6 lbs (6.61 kg)

Posted in Keyser, WV, Music Instruments
From ebay.com - 1 month ago