WILSON, SPLITTER, 859901, DUAL BAND - $40 - (Conway, NH)
The Wilson 859901 signal splitter allows you to split the signal from an amplifier to up to 4 internal antennas with negligible signal loss. The splitter is dual band/iDEN, and so will work with all the amplifiers on our site. This 2-way splitter allows you to drive two interior antennas from a single amplifier/repeater. Because you are splitting equally the signal each antenna will receive is 1/2 of the original signal. This equates to about 70% of the coverage distance when compared to driving a single antenna. You should use this splitter if the areas you wish to cover are approximately equal in area. Connections: The splitter has N Female connectors. Typically a 2ft cable is used to connect the splitter to the amplifier. Any cable length can be used, but the total cable length in the system should be kept to a minimum to minimize attenuation. Lengths of coaxial cable can then connect the splitter to the internal antennas. SKU 859901 Weight 0.7500 Frequency 800MHz, 1900MHz, Dual Band, iDEN Impedance 50 ohm Connector Type N Female Signal Split Ratio Equal Loss Both ports -3dB
ADVERTISEMENT
From ebay.com - 1 month ago