QSC Powerlight 1.4 Power Amplifier 1400 Watts - quantity - $200 - (Gibsons, BC)

Good cosmetic and working condition. QSC Powerlight 1.4 came was used in corporate A/V and spent it's life in a rack. lots of bang in a light package, only 18lbs! 300W per channel into 8 ohm, 500W per channel into 4 ohm, 700W per channel into 2 ohm, cooling fan, short protection, data port, XLR and 1/4 in. inputs, MDP binding post outputs, 2 rack spaces. FEATURES: Stereo Mode (both channels driven) • 8 ohms FTC 0.1% THD 20 Hz-20 kHz : 300W • 8 ohms EIA 1.0% THD 1 kHz: 325W • 4 ohms FTC 0.1% THD 20 Hz-20 kHz: 500W • 4 ohms EIA 1.0% THD 1 kHz: 550W • 2 ohms EIA 1.0% THD 1 kHz: 700W Bridge Mono Mode • 8 ohms FTC 0.1% THD 20 Hz-20 kHz: 1000W • 4 ohms EIA 1.0% THD 1 kHz: 1400W • Distortion (SMPTE-IM): less 0.05% • THD (Typical): 4 ohms to 8 ohms: 20 Hz-20 kHz,10 dB below rated power. 1.0 kHz and below, full rated power: 0.01% • Damping Factor (1 kHz and below): greater 350 • Signal to Noise (20 Hz-20 kHz): 108 dB • Input Sensitivity @ 8 ohms: 0.96 Vrms • Voltage Gain: 50x (34 dB) • Output Circuitry: H (2-Step) • Cooling (rear to front airflow): Single Fan • Height (1 RU=1.75 inches (4.45cm): 2 RU • Weight (net): 18 lbs • 120v Current Consumption(1/8 Power Pink Noise @ 4 ohms) Multiply current by 0.5 for 230V units: 5.5 A • Connectors (each channel) Input: Neutrik Combo XLR plus 1/4 inch TRS input and Barrier strip Output: Touch-proof binding posts • Frequency Response: 8 Hz-100 kHz, +0, -3 dB • Input Impedance: 10 K ohms unbalanced, 20 K ohms balanced • Amplifier Protection: Full short circuit, open circuit, thermal, ultrasonic and RF protection. Stable into reactive or mismatched loads. • Power Requirements: 120, 230 VAC, 50-60 Hz • Dimensions 19.0 inch (48.3 cm) rack mounting 17.9 inches (45.5 cm) deep behind front mounting rails.

Posted in Gibsons, BC, Music Instruments
From ebay.com - 1 month ago