CALESCO Waterbed Heater - New Sealed! - $64 - (Rochester, NY)

CALESCO Waterbed Heater 325W HARDSIDE Type:NEWHardside & Deep Fill Softside Waterbed HeaterRating:325 Watts--Stronger than most brandsDimension:Heating Pad --11.8x24“Temperature Control:ElectronicPower supply:120 VAC, 60 Hz--Works with U.S. Canada outlets--Heating Circuit:Etched Copper foil. US Patent No. 4,908,497Element Insulation:Double insulated, with an outer sheath of watertight, Polyester tested to UL 1445 by independent test authority.Power Cord & Plug:Integrally molded. Watertight. Tested for tensile strength. *Plug Is designed for U.S. Outlets.* It will not work with European outlets or other Countries with a different voltage than the U.S. If you need a heater for 220/240 voltage for Europe or elsewhere.Over Heat ProtectionAutomatic protector incorporated in the element.Cord length:5.9 ft + 4.9 ft Thermostat Temperature Control:Electronic thermostat with thermistor transducer.Enclosure Material:Fire resistant plastic.Temperature Range:70ºF - 100 ºFTemperature variation at PVC mattress:Electronic thermostat ± 1ºF at normal comfort room temperature.When buying a water bed heater you should measure the depth of the cavity in your bed. Most hard side waterbeds are 9 inches deep and most deep fill softsides beds are 7-9 inches in depth. This heater is designed for Hardside or Soft side waterbeds that have a cavity 7 inches or deeper in depth. If your bed has a cavity less than 7 inches deep we have a different heater for that type of waterbed which is a low watt heater or a soft side heater (please click on our soft side heaters if needed).Keep in mind, if you have a waterbed with a single bladder you would just one heater but if you have two separate bladders then you would need to use two heaters.

Posted in Rochester, NY, Furniture
From ebay.com - 1 month ago